Adjustable Tidy Rail
Dimensions
Width - 109.5cm
Depth - 48.5cm
Height - 182cm
Important
- Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the
Customer Helpline: 08456 400800
Assembly Instructions
- Please keep for future reference
932/7502
Issue 1 - 22/03/11
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Assemble the unit as close to its
final position (in the same room)
as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• If using power tools, please
follow the safety instructions
supplied with the tools.
• We do not
recommend the
use of power
drill/drivers
for
inserting screws
,
• Dispose of all packaging
carefully and responsibly.
Safety and Care Advice
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Important
- Please read these instructions fully before starting assembly
as this could damage the unit.
Only use hand screwdrivers.
1
Upper side support x 2
(105cm)
1
Lower side support x 2
(78.9cm)
2
Lower adjustable support x 1
(73.5cm)
4
Cross bar x 2
(104.2cm)
5
Adjustable hanging rail (short) x 1
(55cm)
6
Adjustable hanging rail (long) x 1
(58cm)
7
Bottom cross bar x 2
(104.5cm)
8
Leg tube x 2
(48cm)
9
Upper adjustable support x 1
(100cm)
3
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the
Customer Helpline: 08456 400800
2
3
Note:
The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
Components - Fittings
Please check you have all the fittings listed below
If you have damaged or missing components,
call the
Customer Helpline: 08456 400800
Plastic cap x 2
A
Adjustor x 1
D
G
Allen key x 1
Plastic end sleeve x 4
B
50mm Flat Hex. Screw x 10
E
Spacer x 4
H
Joint x 2
C
50mm Hex. Socket Flat Screw x 2
F
Ruler
- Use this ruler to help correctly identify the screws
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
