Areva MiCOM P441, Техническое руководство

Страница: 505 / 636

Commissioning Test & Record
Sheets P44x/EN RS/E33
MiCOM P441/P442 & P444 Page 9/10
1.2 Setting Checks
1.2.1 Application-specific function settings applied?
Yes/No*
Application-specific programmable scheme logic settings applied? Yes/No/na*
If settings applied using a portable computer and software, which
software and version was used? __________________
1.2.2 Application-specific function settings verified? Yes/No/na*
1.2.3 Application-specific programmable scheme logic tested? Yes/No/na*
1.2.4 Protection Function Timing Tested? Yes/No*
Overcurrent type (cell [3502 I>1 Direction]) Directional
/Non-directional*
Applied voltage _________V/na*
Applied current _________A
Expected operating time _________s
Measured operating time _________s
1.2.5 Trip and Auto-Reclose Cycle Checked Yes/No/na*
1.3 On-load Checks
Test wiring removed? Yes/No/na*
Disturbed customer wiring re-checked? Yes/No/na*
On-load test performed? Yes/No*
1.3.1 VT wiring checked? Yes/No/na*
Phase rotation correct? Yes/No*
Displayed Voltage Primary/Secondary*
Main VT Ratio






y] Sec' VT [Main
Primary] VT [Main
_______V/na*
C/S VT Ratio






Secondary] VT [C/S
Primary] VT [C/S
_______V/na*
Voltages Applied value Displayed value
Va _______V _______V
Vb _______V _______V
Vc _______V _______V
C/S Voltage _______V/na* _______V