Areca ARC-1330 Series, Руководство пользователя

Страница: 46 / 53

DRIVER INSTALLATION
46
The supplied software CD that comes with ARC-1330 series host
adapters incluede the compiled and tested drivers for FreeBSD. You
can download updated versions of compiled and tested drivers for
FreeBSD from the Areca web site at http://www.areca.com.tw.
Please refer to the “readme.txt” file on the included software CD or
website to make driver diskette and to install driver on the system.
4.5 Driver Installation for Mac OS X
After hardware installation, the SAS/SATA disk drives connected to
the SAS host adapter must be configured and the volume set units
initialized by the controller before they are ready to use by the
system.
4.5.1 Installation Procedures
This section describes detailed instructions for installing the Areca
Mac driver & CLI utility for the ARC-1330 series on your Intel_
based Mac Pro. You must have administrative level permissions
to install Mac driver & utility. You can use the ARCSAS installer
to install Mac driver & CLI utility at once or “Custom” to install
special components.
To follow the process to install driver & utility on Intel-based Mac
as below:
1. Insert the Software CD that came with your Areca SAS host
adapter.
2. Double-click on the “install_arcsas.zip” file that resides at <CD-
ROM>\packages\MacOS to add the installer on the Finder.
3. Launch the installer by double-clicking the install_arcsas on the
Finder.
4. Follow the installer on-screen steps, responding as needed, to
complete the Areca driver and CLI utility installation.