Original User Manual
–
A
REBO
S Cable Hoist
3
Thank you for purchasing our product. Please read the operating instructions carefully before using
the product for the first time. If you give the product to a third party, this manual must be handed
over with it. Keep the instruction manual for future reference. The drawings in this manual may
not match the physical objects. Please refer to the physical objects.
1.
Important instructions
•
If the lifting force during lifting is too low so that the load cannot be lifted, you should check
whether the voltage on site reaches 230 V ± 5%.
•
The device works under voltage of 230 V ± 5%. If the voltage does not meet the
requirements, the lifting force must be reduced.
•
In case of malfunctions, please contact us or get qualified specialists.
2.
Explanations of the symbols
On the basis of a CE marking it can be recognized that a product complies with the legal
provisions of the European legal standards and can therefore be traded within the
European Community.
This product must
not
be disposed of with household waste!
Warning!
Read the safety instructions carefully. The
Failure to follow the safety precautions can result in serious injury or damage.
Keep the operating instructions in a safe place.
Use caution when using this article.
This product has been tested and certified by TÜV Rheinland.
The "GS" symbol stands for tested safety. Products with
marked with this symbol correspond to the requirements of the German
Product Safety Act (ProdSG).
