Original User Manual
–
A
REBO
S Spa Pool Copenhagen/ Bora Bora
6
hot tub.
2.
Ensure your spa hot tub is plugged into an external mains socket, professionally fitted, with
weather proofing. We DO NOT recommend using an extension cable as this can be a fire risk.
3.
Do not place your hot tub in direct sunlight, or over inflate it, as this will cause the hot tub to
bulge in areas as the PVC heats up in the direct sun. This bulging could also put additional
stress on the internal welds leading to a weld failure.
4.
During filling, emptying or when in use, water may spill out. Install near to a drainage point
capable of managing the volume of water.
4.2 Before setting up indoors
1.
Floor must be able to withstand weight of the spa’s occupants.
2.
Floor should be a non-slip, level surface.
3.
Before placing your hot tub indoors, ensure suitable drainage is available and can be
reached. Carefully consider the placement of your hot tub before installation.
4.3 Setting up
1.
Lay groundsheet on a flat, even surface, clear of sharp objects.
2.
Unpack the spa on groundsheet.
