![AREA iCOOL MAX 17 MT Скачать руководство пользователя страница 29](http://html1.mh-extra.com/html/area/icool-max-17-mt/icool-max-17-mt_operation-and-maintenance-manual_2966362029.webp)
ND18-05.01
Area Cooling Solutions Sp. z o.o.
Ul. Relaksowa 27
55-
080 Nowa Wieś Wrocławska
tel/fax +48 71 354 56 24
29/48
wziernik odpowiada to odpowiednio 1/3
wziernika (minimum) i 2/3 (maksimum).
Kontrolę ilość i jakości oleju należy wykonywać
w regularnych odstępach czasu we wszystkich
typach sprężarek.
compressors equipped with a sight glass it
corresponds to 1/3 (minimum) and 2/3
(maximum) of the scale. Check the oil quantity
and quality regularly regardless of the
compressor type.
W przypadku sprężarek i tandemów
niewyposażanych we wzierniki sugeruje się
następujące metody sprawdzania napełnienia
olejem:
- poprzez okresowe ważenie urządzenia wagą
precyzyjną,
- poprzez okresowe zlewanie oleju połączone z
jego całkowitą wymianą.
To determine the oil amount in compressors
and tandem units not equipped with sight
glasses do the following:
- periodically weight the unit by means of a
precision balance,
- periodically drain the oil and replace it.
13.3.
Grzałki karteru /
Cranckase heater
Temperatura grzałki może
przekraczać 80
º
C, co grozi
poparzeniem w przypadku kontaktu
bezpośredniego z skórą.
Temperatura oleju powinna być
utrzymywana na poziomie około
+45 do 55
º
C.
O ile stwierdzi się brak grzałki lub jej
uszkodzenie należy bezzwłocznie zgłosić to
dostawcy urządzenia.
Niepodłączenie grzałki elektrycznej prowadzi do
zniszczenia sprężarki. W takim wypadku
roszczenia gwarancyjne nie będą rozpatrywane.
Grzałka karteru oleju musi być podłączona do
zasilania, co najmniej 24 godziny przed
rozruchem sprężarki po jej dłuższym postoju
The heater can reach the
temperature of 80
0
C. Touching the
heater can cause burns. The oil
temperature should be maintained
at approxi45
0
to 55
0
C.
Lack of heater or its damage must be
immediately reported to the supplier.
Failure to connect the electric heater to the
power supply can damage the compressor. This
will void the warranty.
Oil crankcase heater must be connected to the
power supply at least 24 hours before starting
the compressor after longer period of non-
operation, as well as during normal operation of