22103-004
22103-017
Preparing the cap for installation.
Lay the crate flat so that the
cap (A) is in the installed position. Carefully disassemble the crate
allowing you to lift the cap out of the crate. Inspect and clean the cap. Clean
the outside of the cap by using clean low-pressure water and mild soap.
Be sure to clean the front window thoroughly before the installation of the
cap on the truck.
Remove the shipping rails.
A.R.E. Accessories
• 400 Nave Road, Massillon, OH 44648 • 866.658.8376 • 4are.com © A.R.E. Accessories LLC, 2021
Part# 24953 Rev. 12-15-21
2
INSTALLATION SHEET
Any damaged or missing parts?
Parts will be shipped to you directly.
Call 866-658-8376, Mon - Fri, 8:00 a.m. - 4:00 p.m. EST
JEEP GLADIATOR CAP
PARTS INCLUDED
IN YOUR KIT
Cap
1x Mounting tape
2x Cap clamps 22103-004
(trucks without utility tracks)
2x Cap clamps 22103-017
(trucks with utility tracks)
1x Wiring harness
1
TOOLS
REQUIRED
l
Fork lift
l
Saw horses
l
Wire snips
l
Pliers
l
Mild soap
l
Glass cleaner
l
Cleaning rags
l
Denatured alcohol
l
Scissors or cutting tool
l
Masking tape
l
9/16” wrench
l
7/16” wrench
l
Allen wrench set
l
Pry bar and hammer
(to disassemble crate)
l
Adjustable flat head clamps
(recommended welding style)
CX CLASSIC
A
E
C
B
D
B
C
A
D
E
