Arduino MKR1000, Начало работы

Страница: 1 / 11

Getting started with the Arduino/Genuino
MKR1000
MKR1000 board has been designed to offer a practical and cost effective solution for makers seeking to add
Wi-Fi connectivity to their projects with minimal previous experience in networking. Learn how to set up the
programming environment and get the hardware up and running, ready for your projects, in minutes.
The MKR1000 is programmed using the Arduino Software (IDE) (//www.arduino.cc/en/Main/Software), our
Integrated Development Environment common to all our boards and running both online
(https://create.arduino.cc/editor) and offline. For more information on how to get started with the Arduino
Software visit the Getting Started page (//www.arduino.cc/en/Guide/HomePage).
Use your Arduino/Genuino MKR1000 on the Arduino Web IDE
Use your Arduino/Genuino MKR1000 on the Arduino Desktop IDE
Installing Drivers for the MKR1000
Open your first sketch
Select your board type and port
Upload the program
Learn more on the Desktop IDE
Tutorials
Please Read...
Features
Upgrading Firmware and uploading SSL certificates
Use your Arduino/Genuino MKR1000 on the Arduino Web
IDE
GETTING STARTED (/EN/GUIDE/HOMEPAGE) > MKR1000
-
-
-
-
-
-
-
-
-
-
-
(https://create.arduino.cc/editor)
All Arduino and Genuino boards, including this one, work out-of-the-box on the Arduino Web Editor
(https://create.arduino.cc/editor),
no need to install anything .