Introduction
The iPower 600 Battery Case provides best iPhone 4/4S case
features in one compact, light-weight, easy to use, protective and
ultra-thin case with built-in rechargeable battery pack. It virtually
doubles up your iPhone 4/4S battery on the go and meets your
emergency power needs anywhere anytime.
A) iPower Battery Case
B) Micro USB Cable
C) Manual
Specification
Quick Setup Guide
Separate the iPower Head from the
Base. Then Slide the iPhone (bottom
first) into the iPower Base (as
shown), making sure the connector
within the iPower lines up with the
adapter on the iPhone.
Slide the iPower Head onto the top of
the iPhone, making sure that the side
guides on the Head line up with the
side tracks on the Base.
iPower
Connector
iPhone
Adapter
Tracks
Guides
Tracks
Guides
Product Description
1
2
4
5
On/Off Switch
iPhone Connector
Micro USB Port
Battery Status Button
Battery Status
LEDs
Embedded iPower Battery
iPower Battery Case User Manual
If any components are missing from the package, return the
product to your dealer immediately.
Package Components
3
Func
ti
on
Rechargeable Li-Polymer ba
tt
ery
Capacity
1900mAh
Standby
ti
me
Up to 230 hours
Talk
ti
me
Up to 6 hours on 3G, up to 12 hours on 2G (GSM)
Internet use
Up to 5.5 hours on 3G, up to 8 hours on Wi-Fi
-
Audio playback
Up to 30 hours
Video playback
Up to 10 hours
Life
ti
me
≥
500
ti
mes
Output Voltage
DC 5V
±
5%
Output Current
500mA (Max.)
Input Voltage
5.0V
Input Current
1000mA (Max.)
Working temperature
-10 to 40
℃
℃
Dimension
4.96’ x 2.48’ x 0.62’ (126.5x63.3x16.7mm)
Weight
2.64oz. (75g)
Power Usage and Recharging
6
iPower On/Off switch & battery backup for the iPhone
The On/Off switch on the iPower determines whether the iPhone
uses its own battery resource or the iPower battery reserves. “On”
instructs the iPhone to use the iPower’s battery resource, otherwise
the iPhone will use its own battery. Normally, you would leave this
switch “Off” until your iPhone runs low on battery power, after which
you can switch it to “On”. Whenever the iPhone is using the iPower’s
battery resource, the “battery symbol” that displays in the iPhone
screen will have a charging symbol in it. As long as the switch is ON,
the iPhone will first use power from the iPower battery until it is
exhausted; then the iPhone will use it’s own battery resource.
Charging the iPower battery
Take the cable supplied in the package and use the smaller Micro
USB connector to attach it to the “Micro USB Port” on the iPower;
then take the larger standard USB connector on the cable and
attach it to a computer USB port or a USB wall-plug power adapter
made for 4/4S iPhones.
Recharging takes 2-3 hours and the 4 LEDs on the back of the
iPower will blink while recharging. Charging statuses represented
by the iPower LEDs are as follows:
If you are charging the iPower with the iPhone installed, the iPhone
will be the first device to become fully charged.
Note:
Recharge your iPower battery every 2 months when not in
use.Checking iPower battery status - Press the Battery Status Button
10-20%
30-50%
60-80%
80-90%
100%
Warnings
Excessive electrical noise in certain environments may affect iPower functionality.
Comply with National, Int’l Flight safety regulations when using device on flight trips.
This product’s operating temperatures are between 14
˚
F~104
˚
F (-10
˚
C~40
˚
C). Storage
Temperatures should be between -4F
˚
~185
˚
F(-20
˚
C~85
˚
C) .
Do not store the iPower where temperatures are excessively high and avoid sunlight.
Avoid any trauma or impact to the iPower. If there are any dents, punctures, tears,
deformities or corrosion, no matter the cause, discontinue use and contact manufacturer
or dispose of it in an appropriate manner at your local battery recycling center.
Do not disassemble, repair, modify or replace the iPower or any of its components.
Keep the iPower dry at all times and do not expose the iPower to moisture or liquid.
Only use the device’s USB connector and instruction herein to recharge the iPower.
All batteries are subject to thorough quality assurance inspection. If you find that your
battery is excessively hot, is emitting odor, is deformed, has abrasions/cuts or is
experiencing or demonstrating abnormal behavior, immediately stop all iPower use and
contact the Manufacturer.
Never dispose of the iPower in public garbage disposal; it is unlawful under state and
federal environmental laws and regulations. Dispose of your iPower at your local
battery-recycling center.
7
6
