19/90
Furthermore, the desired temperature can be set for each day.
1.
Push “P” pushbutton; the light of P light up in the display
2.
Push “DAY pushbutton repeatedly to select the day of the week that
should be setted - d1 (Monday), d2 (Tuesday), d3 (Wednesday).....d7
(Sunday)
3.
Once the day has been selected, press “EDIT” pushbutton repeatedly to
select the working period (from P1 to P6).
4.
Once the period has been selected, press “TIME/ON” pushbutton
repeatedly to set at what time the working period should start and
afterwards press “TIME/OFF” pushbutton repeatedly to set at what time
the working period should end.
5.
Press “EDIT” pushbutton to confer and select the next working period.
After repeat point 4.
6.
Repeat steps 2 to 5 to set the desired days/time. Unplanned days and time
are equivalent to stand-by periods.
Once the working period has been set, it’s possible set the desired temperature
for each period:
1.
Push “DAY” pushbutton to select the day
2.
Once the day has been selected, press “EDIT” pushbutton repeatedly to
select the working period (from P1 to P6).
3.
Push + o - pushbuttons to select the desired temperature
4.
Press “EDIT” pushbutton to confer and select the next working period.
After repeat point 3.
5.
Push “DAY” pushbutton to confirm the settings and select the next day;
6.
Repeat steps 2 to 5 to set the desired days/periods.
7.
Push “OK” pushbutton to save the settings.
-
WARNING: the weekly programming will work correctly only if the time
and day of the week have been set and if the working period P1-P6
have been set.
To deactivate the weekly program and the related temperature press “P”
pushbutton; the “P” indicator light will turn off in the control panel.
-
Warning
: the weekly settings will be stored till the unit is in stand-by
mode or working status. In case of power failure, removing the plug
from the wall socket, or switching off the appliance using the On / Off
switch (1), all settings will be lost.
Set open-window detection (if unit is in working status):
This function shut off the appliance if the ambient temperature deviates from the
desired temperature of 5 ° C-10 ° C, in less than 10 minutes.
When this function is activated, the unit also activates the automatic working
mode.
To set the open-window detection:
1.
Push open-window pushbutton (
). The related indicator light and the
automatic working mode indicator light will lights up in the display. The
display will show the desired temperature (23°C as default).
2.
Push + o - pushbutton to set the desired temperature (from 10°C to 49°C).
3.
Push “OK” pushbutton to confirm.
