20
Attention
: the settings of time and day will be stored till the unit is in
stand-by mode or working status. In case of power failure, removing the
plug from the wall socket, or switching off the appliance using the On / Off
switch (1), all settings will be lost.
Set the automatic working mode (if unit is in working status):
- Push + or - pushbuttons to set the desired room temperature (from
10°C to 49°C). The display will show 23°C as default. Each pressure the
temperature increases or decreases by 1 ° C. If the automatic mode is
set, the °C indicator lights up in the display.
During automatic working mode, the unit select automatically the power
according to the difference between the desired room temperature and
the ambient temperature. In this working mode the appliance can switch
between the different power levels (ventilation, power I and II) and
standby even repeatedly. The selected power level is always shown on
the display.
-To deactivate this function, press the speed (
) pushbutton and
select the desired function (fan only, power I or power II). Once the
automatic working mode is deactivated the °C indicator light will turn off
in the display.
Warning
: the unit switch in stand-by mode after 12 hours of continuous
operation.
Set the weekly program (if unit is in working status):
The weekly program allow to set 6 working period (from P1 to P6) per
day. For each working period is possible set the time when unit should
turn on (Time/On) and when the unit should be in stand-by mode (Time/
Off).
Furthermore, the desired temperature can be set for each day.
1.
Push “P” pushbutton; the light of P light up in the display
2.
Push “DAY pushbutton repeatedly to select the day of the week that
should be setted - d1 (Monday), d2 (Tuesday), d3 (Wednesday).....d7
(Sunday)
3.
Once the day has been selected, press “EDIT” pushbutton repeatedly
to select the working period (from P1 to P6).
4.
Once the period has been selected, press “TIME/ON” pushbutton
repeatedly to set at what time the working period should start and
afterwards press “TIME/OFF” pushbutton repeatedly to set at what
time the working period should end.
5.
Press “EDIT” pushbutton to confer and select the next workinf period.
After repeat point 4.
6. Repeat steps 2 to 5 to set the desired days/time. Unplanned days and
time are equivalent to stand-by periods.
