19
display will show “- -”), minimum power (the display will show “- -” and the
indicator light “I” will be on in the display) or maximum power (the display
will show “- -” and the indicators light “I” and “II” will be on in the display).
-Push Timer
pushbutton when unit is on to set the automatic
shutdown (timer off function) from 1 to 12 hours. Each pressing increase
1 hour time. If the timer off function is activated the indicator light will be
on in the display. To deactive timer off function, push timer button till the
display show “0 0”.
-Push Timer
pushbutton when unit is in stand-by mode (“S” on the
display) to set the automatic on from 1 to 12 hours (timer on function).
Each pressing increase 1 hour time. If the timer on function is activated
the display shows the appointment turn-on time and the indicator light will
be on in the display. After the setting time the unit fill turn on automatically.
The default setting temperature is 23°C and the indicator light related to
the timer will turn off in display. To deactive timer on function, push timer
button till the display show “0 0”.
Attention
: after timer on, the unit will turn into stand-by mode after 12
hours of continuous work if the temperature and weekly program has not
been set.
REMOTE CONTROL OPERATION:
Attention: the remote control is provided with included battery. Before
us it remove the plastic tag from the battery tray. When the battery is
exhausted it must be replaced with another of the same type (CR2025).
The On/Off (
), speed (
) and timer (
) pushbuttons of the
remote control have the same function of the pushbutton in the control
panel.
Set the current time and day (if unit is in stand-by mode or working
status):
1.
Press “SET” pushbutton: the display show “12” as default hour.
2.
Press + or - pushbuttons to select the current time (hours).
3.
Press “SET” pushbutton again: the display show “30” as default
minutes.
4.
Press + or - pushuttons to select the current time (minutes).
5.
Press “SET pushbutton” for the third time: the display show “d7” as
default day of the week.
6.
Press + or - pushbuttons to select the current day: d1 (Monday), d2
(Tuesday), d3 (Wednesday).....d7 (Sunnday).
7.
Press “OK” pushbutton to confirm the settings.
