Arcus DMX-ETH, Руководство пользователя

Страница: 25 / 78

DMX ETH Manual page 25 rev 1.16
2. Set SSPDM – Set the SSPDM parameter. Note that if an on-the-fly speed
change operation is to be used, this parameter must be set before the controller
starts motion.
3. Desired Speed – Once the “Set Speed” button is clicked, the speed will
change on-the-fly to the desired speed.
4. Desired Acc/Dec – The acceleration/deceleration use for the on-the-fly speed
change operation.
5. Set Accel + Speed – Start the on-the-fly speed operation
D. DIO Status
Figure 6.7
1. Digital Input Status – Status of DI1 and DI2
2. Digital Output Status and Control – Status of DO1 and DO2. When used
as general purpose outputs, the outputs can be triggered by clicking on the
corresponding circle.
3.
A2-DRV Alarm
– Status of DMX-A2-DRV alarm output
4. Latch - encoder and pulse positions can be captured/latched with an input
trigger.
E. Terminal
4
1
2 3