Arctic Cat HDX, Руководство оператора

Страница: 44 / 66

42
HDX084A

NOTE: On the Prowler front differ-
ential, the lubricant level should be
within one inch of the plug. On the
rear drive, the lubricant level should
be visible at the plug threads.
3. Drain the oil into a drain pan by
removing in turn the drain plug from
each.
CF107A
CF106A
4. After all the oil has been drained,
install the drain plugs and tighten to
45 in.-lb.
5. Pour recommended oil into each fill
hole.
6. Install the fill plugs and tighten to 16 ft-
lb.
Hydraulic Brake
Brake Fluid
HDX081A
UTV-367A
1. Check the brake fluid level in the
brake fluid reservoir. The fluid level
must be maintained between the
MAX and MIN level marks. If the
level in the reservoir is low, add DOT
4 brake fluid.

NOTE: If fluid must be added,
remove the rubber access plug
beneath the hood.

NOTE: The brake fluid reservoir is
located on top of the master cylin-
der under the hood.
2. Press the brake pedal several times to
check for firmness.
3. If the pedal is not firm, the system
must be bled.
CAUTION
Inspect the oil for any signs of metal
filings or water. If found, take the
vehicle to an authorized Arctic Cat
dealer for servicing.
HDX
! WARNING
Be sure to inspect the hydraulic
brake system before each use.
Always maintain brakes according to
the Maintenance Schedule.
HDX
PROWLER