41
3. Loosen the oil fill cap (700 HDX) or
level stick (500 HDX/Prowler mod-
els). Be careful not to allow contami-
nants to enter the opening.
HDX042A
HDX234A
4. Remove the drain plug from the bot-
tom of the engine and drain the oil
into a drain pan.
5. Using the oil filter wrench and a ratchet
handle (or a socket or box-end wrench),
remove the old oil filter and dispose of
properly. Do not re-use oil filter.
NOTE: Clean up any excess oil
after removing the filter.
6. Apply oil to the new filter O-ring and
check to make sure it is positioned
correctly; then install the new oil fil-
ter. Tighten securely.
7. Install the engine drain plug and
tighten it securely. Pour the recom-
mended oil in the filler hole (700
HDX) or level stick opening (500
HDX/Prowler models). Install filler
plug or level stick.
8. Start the engine (while the vehicle is
outside on level ground) and allow it
to idle for a few minutes.
9. Turn the engine off and wait approxi-
mately one minute. Recheck the oil
level.
10. Inspect the area around the drain plug
and oil filter for leaks.
11. Install the center console (Prowler) or
seat base and seat back (HDX); then
install the seat(s) making sure they
are securely latched.
Front Differential/Rear
Drive Gear Lubricant
(Inspecting/Changing)
Inspect and change the gear lubricant in
each according to the Maintenance
Schedule. When changing the lubricant,
use the appropriate hypoid oil and use the
following procedure.
1. Place the vehicle on level ground.
2. Remove each oil fill plug.
PR064A
PR065A
HDX083A
700 HDX
500 HDX/
Prowler Models
Prowler
Prowler
HDX
Содержание HDX
Страница 1: ...2016 OPERATOR MANUAL Prowler HDX www arcticcat com...
Страница 58: ...56 Maintenance Record DATE MILEAGE SERVICE PERFORMED NOTES...
Страница 62: ...60 NOTES...