Arctic Cat DVX 400 2004, Руководство по обслуживанию

Страница: 141 / 153

6
AF680D
3. Place the two halves of the throttle control onto the
handlebars and secure with the two machine screws.
AL610D
ADJUSTING
1. Slide the boot back to reveal the jam nut; then loosen
the jam nut.
AF682D
2. Rotate the adjuster sleeve until 0.5-1.0 mm (0.02-
0.04 in.) is attained.
AL611D
Gearshift Pedal
The gear shift pedal is attached to a ratchet mechanism in
the transmission. Each time a gear is selected, the pedal will
return to its normal position ready to select the next gear.
ATV2008
To return to neutral, press down repeatedly (once for each
gear) on the pedal. Shift into gears by pressing down on
the pedal for first gear and reverse gear and lifting up on
the pedal for second through fifth gear. The ratchet mech-
anism makes it impossible to upshift or downshift more
than one gear at a time.
Reverse Selector/Lock
REMOVING
1. Remove the reverse selector knob mounting screw;
then remove the cap screw securing the lower cable
housing to the reverse cable bracket.
2. Disconnect the cable end from the reverse lock lever;
then remove the cable assembly.
INSTALLING
1. Engage the lower cable end in the reverse lock lever;
then attach the cable housing to the reverse cable
bracket and tighten the cap screw securely.
2. Route the cable along the upper right frame tube;
then attach the reverse selector knob to the frame
with the mounting screw and tighten securely.
3. Replace any cable ties that were removed.