Arctic Cat DVX 400 2004, Руководство по обслуживанию

Страница: 116 / 153

7
9. Remove the dust covers (1), washers (2), and spacers
(3) from the swing arm; then remove the spacers
from the front arm and rear arm.
SP345
SP346
SP347
CLEANING AND INSPECTING

NOTE: Whenever a part is worn excessively,
cracked, or damaged in any way, replacement is
necessary.
1. Inspect the dust covers, seals, and spacers for wear or
damage. If any defect is found, they must be
replaced.
2. To inspect swing-arm bearings and bushings, insert
the spacer (1) into the bearing (2) and bushing (3);
then check for excessive play by moving the spacer
up and down. If excessive play is noted, the bearing
must be replaced.
SP348
ATV2192
3. Remove the dust seals; then using a bearing remover
and slide hammer, remove the worn bearings.
SP349

NOTE: Removed bearings must be replaced with
new ones.
4. Using an appropriate bushing driver, remove the
pivot bushing.