Arctic Cat 2012 700 i Cruiser Скачать руководство пользователя страница 384

Страница: 384 / 708

Divi

sio

n I

- Sa

Main TOC

Section TOC

N ext

Prevention

Overview

When using this ATV, prevention is the

name of the game. “Had you only

known” something could go wrong, you

would have prevented it. If you don’t

notice your conditions and surroundings

before riding your ATV, you give up con-

trol over the situation. Using ATV pre-

vention techniques helps you forecast

potential hazards before they injure you

or damage your ATV.
Following the safety instructions and

warnings in this manual will help you

“P.A.S.S.” the safety test. P.A.S.S. stands

for “

revention,” “

ctive Riding,”

“

ound Judgment,” and “

upervision.”

Remembering P.A.S.S. and what it stands

for will help you have a safe, predictable

ride every time you go out on your ATV.

Always wear clothing suited to the type

of riding you are doing. TRV riding

requires special protective clothing

which will make you feel more comfort-

able and reduce chances of injury.

ATV-0004

You’ll find it important to dress correctly

for riding in order to prevent scraped skin

and serious head injuries. It’s easy and

could save you time in the long run not

having to contend with an injury. Of

course, it also makes sense to remember

the seasons. Wear a hat under your hel-

met and a snowmobile suit in the winter

and lighter, protective clothing in the

summer. Following is the minimum pro-

tection you need to wear during every

ride:

Gloves

Your hands are targets for flying objects

and branches. Along with providing skin

protection, gloves will shield your hands

from harsh weather. Wear gloves that are

weather resistant and have a gripping sur-

face to keep them from sliding off the

handlebars. Off-road style gloves with

knuckle pads are the best for comfort and

protection.

Boots/Ankle Protection

Wear a boot that covers the largest possi-

ble area of your leg (preferably up to

your knee) and can handle significant

impact. Choosing boots with low heels

and a good tread will help prevent your

feet from slipping off the footrests in wet

or rugged conditions or getting hurt if

they get hit by rocks, dirt, or branches.

Helmet

Your helmet is the most important piece

of protective gear for safe riding. A hel-

met can prevent a severe head injury.

There are several types of helmets on the

market, but make sure you wear a helmet

that complies with the standards of the

U.S. Department of Transportation

(DOT), The Snell Memorial Foundation,

or the American National Standards

Institute (ANSI). Helmets that comply

with one or more of these agency’s stan-

dards have a sticker on the inside or out-

side of the helmet.

Safe Riding Clothing

and Gear (Operator and

Passenger)

2012 700 Diesel

Содержание 2012 700 i Cruiser





































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2012 700 i Cruiser

Отзывы:

Arctic Cat 2012 700 i Cruiser, Руководство оператора, Страница: 384 / 708

Результаты поиска

Содержание 2012 700 i Cruiser

Отзывы: