Driving 6
47
6.7
Adjusting the shock absorb-
ers
Fig. 32
Adjusting the suspension:
1. Remove dirt and deposits from the sleeve (1).
2. Relieve shock absorber.
3. Using a wrench out of the on-board tool kit, turn sleeve (1) to the desired position
(refer to the following table).
NOTE
The shock absorber have five
adjustment options to adapt the
suspension to the different ter-
rain and load conditions. If the
suspension is too soft or too
hard, the suspension can be
adjusted in accordance with the
following table.
WARNING
The suspension shall be adjusted identically on both sides of an axle.
Position
Spring force
Adjustment
Load
1
Weak
Soft
Light
2
3
4
5
Stronger
Hard
Heavy
