Controls 4
25
4.10
Light switch
The light switch (3) has two switch posi-
tions:
– High beam (1)
– Low beam (2)
To select the desired function, move the
light switch (3) to the corresponding posi-
tion.
Fig. 16
4.11
Indicator switch
Switching indicator on:
1. Push indicator switch (1) from the cen-
tre position to the desired turning
direction and then release. The indica-
tor switch automatically returns to the
centre position.
Switching indicator off:
1. Press and release indicator switch (1).
Fig. 17
4.12
Warning light switch
The warning light switch (2) has two switch
positions:
– Warning light on (1)
– Warning light off (3)
To select the desired function, move the
warning light switch (2) to the correspond-
ing position.
Fig. 18
NOTE
High beam and low beam can
only be switched on when the
ignition key is in the LIGHT posi-
tion (refer to Fig. 7).
