Controls 4
19
4.1.2
Ignition switch (XR/Alterra)
The ignition switch has three switch positions:
– OFF (1): All electrical circuits except for the accessory connection are switched
off. The engine cannot be started. You can remove the ignition key in this switch
position.
– RUN (2): The ignition circuit is closed and the engine can be in operation. All light-
ing functions are switched. You cannot remove the ignition key in this switch posi-
tion.
– START (3): The ignition circuit is
closed and the starter is activated.
When releasing the ignition key, it will
return to the position RUN. You cannot
remove the ignition key in the position
START.
Fig. 8
4.2
Steering lock
The steering lock (1) is installed on the left-
hand side underneath the front fender.
Locking the steering:
1. Turn handlebar to the left as far as it
will go.
2. Insert the key into the steering lock.
3. Turn key anti-clockwise and remove it.
Unlocking the steering:
1. Insert the key into the steering lock.
2. Turn key clockwise and remove it.
Fig. 9
NOTE
The accessory connection is sup-
plied by the battery in any switch
position.
