Arcteq AQ 102, Инструкция по эксплуатации

Страница: 7 / 46

1 Document information
Table. 1 - 1. History of Revision 1.
R Reevision vision 1.00 1.00
Date October 2010
Changes - The first revision of the manual.
R Reevision vision 1.01 1.01
Date June 2011
Changes
- Sensor chapter revised.
- DIP switch definition updated.
- "Dimensions and installation" chapter edited: the depth of the unit is changed from 170 mm
to 175 mm.
R Reevision vision 1.02 1.02
Date May 2012
Changes
- One selective scheme and the non-selective scheme are updated.
- DIP switch definition is changed to scheme selection.
- AQ-101 DIN rail version added.
R Reevision vision 1.03 1.03
Date November 2012
Changes - AQ-101 simplified block diagram revised: the name of the BI2 on X1 connector is corrected.
Table. 1 - 2. History of Revision 2.
R Reevision vision 2.00 2.00
Date October 2020
Changes
- Content completely rewritten to improve grammar and readability.
- The "Available logic schemes" chapter updated.
- The AQ-02 point sensor chapter added to the "Arc sensors" chapter, and AQ-02's technical
data added to the "Technical data" chapter.
- The sensor-type dependency list updated.
- The original "Connecting sensors" chapter moved to the AQ-0x instruction booklet, and
replaced with a summary of how to connect point sensors. A summary of connecting fiber
sensors also added to the chapter.
- All technical data checked and updated where necessary.
- Ordering information updated.
- Images updated where necessary.
R Reevision vision 2.01 2.01
Date November 2021
A AQ Q-101 (A -101 (AQ Q-101D -101D))
Instruction manual
Version: 2.01
© Arcteq Relays Ltd
IM00006 5