25
Macintosh™ OS X (10.2 Jaguar and newer)
If you have OS 10.2, you must update to version 10.2.4 or newer. This
is a free update from Apple
®
Computer. You will not require any
special installation of software drivers or extensions. You simply plug
the AV300 into your Macintosh as listed above, and within a few
seconds, the AV300 will be recognized as a mass storage device and
mount on the desktop. You can now use the Hard drive called
JUKEBOX like any other hard drive.
Windows™ ME, 2000, XP (Home/professional)
When connected, the AV300 will be recognized as a
Mass Storage Device and mount automatically within
a few seconds of being connected. Do not use the
drivers on the CD-ROM, those are for Windows98SE.
You will see a new drive letter, such as E: in
My
Computer
called JUKEBOX. You can now use the
Hard drive called JUKEBOX like any other hard drive.
Simply access it using Windows™ Explorer to drag
and drop files to and from the AV300’s hard disk. If it
is not automatically recognized, please refer to the
troubleshooting section at the back of this manual.
Windows
®
98SE
When you first plug an AV300 into a computer running Window™ 98SE, it will recognize the
hardware and ask to have drivers installed. Carefully follow the instructions below. After
installation of the drivers, you will be able to drag and drops file between your computer and the
AV300 using Windows
®
Explorer. Be careful also to understand the correct disconnection
procedure in section 5.2. Incorrect disconnection can cause your computer to freeze or you may
loose data.
26
1.
Windows 98SE has recognized a new piece
of hardware (the AV300) and starts its wizard.
Click on
Next
.
2.
Click on the button
Search for the best
driver
. Open up the CD tray on your
computer and insert the included Archos
CD-ROM and then close the tray. Now click
on
Next
.
3.
Uncheck all of the checked boxes, and then
check the box
Specify a location
. Type in the
drive letter of your CD player (usually D: or E:)
followed by
\Drivers
. Click on Next and
Windows will then load the correct drivers.
4.
Windows will now copy from the CD to
your computer’s hard drive, all the files it
needs to make the USB connection
operational. Click on Next to tell Windows
to install the driver.
5.
Windows will indicate when it has
finished copying the drivers. Click on
Finish. Do not unplug the AV300 from the
computer yet.
Once finished, you should restart your
computer. Upon restart, it will automatically
recognize the connected device (the
AV300). It will be seen as another drive in
Windows
®
Explorer.
