Archgard Optima 34 34-DVI34N, Руководство пользователя по установке, эксплуатации и техническому обслуживанию, Страница: 39 / 43

Optima 34
39
FREQUENTLY ASKED QUESTIONS
Listed below are some frequently asked questions regarding Archgard Gas Fireplaces. If you have ques-
tions that are not listed below, or are not answered in this manual, please contact your Authorized
Archgard Dealer.
Q. My glass has a condensation “fog” when the appliance is first lit.
A. Condensation is normal and will disappear in a few minutes after the glass is heated.
Q. I have a white “film” on my glass. What is the best way to clean the inside of the glass.
A. Frequent cleaning of your glass is recommended. Archgard recommends using a good quality “gas
fireplace” glass cleaner that is available at all authorized dealers. Do not use abrasive materials, and do
not clean the glass or the appliance when the unit is hot.
Q. How do I care for my gold plated trims.
A. Archgard recommends a cleaning with a damp cloth. DO NOT use chemical cleaners as they may
harm the finish, and void your warranty. NOTE: If the top louvers, or top overlay starts to discolor, check
the door gasket seal and replace if necessary.
Q. My fan/blower makes a “whirring” or “humming” noise.
A. Your Archgard gas appliance uses a powerful fan to push heated air into your room. It is not unusual
to hear a “humming” noise when your fan is running. Note: the sound will change depending on the set-
ting that your fan speed control is set at.
Q. I hear a “click” when my fan system activates.
A. When your appliance reaches temperature, it will activate the THERMODISC “fan switch”. The switch
closes the electrical circuit that allows the fan to turn on. This is a normal sound.
Q. I hear a “ticking”, “cracking” or “pinging” sound when my fireplace is running, and after it is turned off.
A. The different gauges of steel used to manufacture your fireplace will expand and contract at different
rates when your fireplace is on, and will continued as your fireplace completes its heating function. You
will likely hear these same sounds more on start up and shut down. This is normal for steel fireplaces.
Q. When my appliance is OFF and my pilot light is lit, I hear a “whisper” sound.
A. The lit pilot can make a small noise. Sometimes in extreme wind conditions you may be able to hear
air entering into the firebox chamber.
Q. I hear a “click" when my main burner turns ON or OFF.
A. Your Gas Control Valve will make a clicking sound when it opens to allow gas to flow to the main
burner. This is a normal part of the operating system.
Q. Can I burn wood and other materials in my gas fireplace.
A. No! Burning anything other than natural or LP gas in a gas fireplace or stove will create a potential fire
hazard and present a danger to your home and its occupants. Only burn the gas fuel for which the unit
was originally designed.
Q. Can I shut my pilot off in the summer?
A. You will save energy by turning off the pilot light if you are not using your appliance for the hot sum-
mer months. Remember to relight it before you want to use the appliance for the first time in the fall. Re-
fer to your owners manual for lighting instructions.
Q. Can I position my gas logs in a different fashion or use a different log set?
A. No. Your gas fireplace is an engineered system that includes the firebox, burner, logs, venting and
options which are tested and listed by CSA. Changing any specifications or placement of the logs could
void your manufacturer's warranty, and possible even your homeowner's warranty.