Archgard OPTIMA 30 - 1, Руководство пользователя по установке, эксплуатации и техническому обслуживанию, Страница: 8 / 32

O
PTIMA 30-1 8
DIMENSIONS AND CLEARANCES Cont...
CLEARANCES TO COMBUSTIBLES
CAUTION:
This appliance is designed for use in any masonry or factory built wood burning fireplace.
It cannot be enclosed by combustible material and used as a built-in gas fireplace without
purchasing a zero-clearance kit. Part # ZC-KIT.
SIDE VIEW
Combustible mantle allow in shaded
area. Mantle extension maybe
increased 1” (25mm) for each
additional 1” (25mm) increase in
clearance height.
Note: With bay window attached
clearances remain the same.
6” (152mm)
Minimum Height From Bottom of Applinace with
a 6” (152mm) Mantel as shown in this picture:
37 ” (940mm)
WARNING: Failure to position the parts in
accordance with these diagrams or failure to
use only parts specifically approved with this
appliance may result in property damage or
personal injury
TOP VIEW
Clearances to Faceplate
1-1/2” (38mm) 1-1/2” (38mm)
Sidewalls or Mantle Supports
Note: If existing wood fireplace hearth protection is removed it must be replaced by a non
combustible hearth protection extending 16” from the front of the fireplace insert.
Note: If mantle projection is other
than 6” (152mm) Minimum height
from bottom of appliance using a:
5” (127mm) mantel 36” (914mm)
4” (100mm) mantel: 35 ” (889mm)
f i r e - p a r t s . c o m