Archgard OPTIMA 30 - 1, Руководство пользователя по установке, эксплуатации и техническому обслуживанию, Страница: 23 / 32

O
PTIMA 30-1 23
SERVICING
Before servicing, read the terms and conditions of the Archgard warranty at the back of the
manual. Contact the Archgard authorized dealer which you have purchased the appliance from
and provide him with details of the problem and the installation information which the installer
has fill out at the back of the manual.
WARNING: Servicing of this appliance must be conducted by a qualified service
technician . Improper servicing, adjustment or alteration of this appliance may
cause property damage, personal injury or loss of life. All servicing should be
conducted with the appliance cold. All replacement parts must be authorized by
Archgard for suitability.
Note: the Shutter is set at the factory and normally only requires setting at higher altitudes.
•
Open the lower grills.
•
Unscrew the 2 screws holding the control panel and remove the panel.
•
The primary air adjustment wing nut is located behind and to the left of the control valve.
•
Loosen the wing nut and slide the primary air shutter to the right to increase primary air and
to left to reduce primary air.
•
Tighten the wing nut after adjustment.
Caution:
Wear gloves when adjusting the primary air with the appliance hot.
INCREASE DECREASE
CONVECTION
BLOWER SPEED
CONTROLLER BOX
ADJUSTMENT WING NUT
PRIMARY AIR SHUTTER
ORIFICE CENTERING BRACKET
ORIFICE CAP
ELBOW FITTING
ADJUSTING PRIMARY AIR
SERVICING UNDER WARRANTY
FLAMES...
The left side shows correct adjust-
ment. The right side shows yellow
sooty flames requiring increase in
shutter opening or cleaning of shut-
ter area due to lint buildup.
f i r e - p a r t s . c o m