Archgard Optima 20-1, Руководство по установке, эксплуатации и обслуживанию для пользователей, Страница: 15 / 33

O
PTIMA 20 - 1 15
LOG PLACEMENT
After opening the log set package, inspect the logs to ensure that no damage has occurred inside the
package. Please report any damage immediately to your Archgard dealer. Gas and vent connection
should be made before installing the logs on the steel burner.
NOTE: Improper placement of logs may cause sooting on the internal parts and glass. Do not use broken
or damaged logs.
Ca
refully place the ember chunks on top of the burner. DO NOT cover the entire surface of the burner.
DO NOT allow embers to obstruct the burner ports. Use embers sparingly when using
PROPANE fuel.
WARNING:
Failure to position the parts in accordance with these diagrams, or failure to use only parts specifically
approved with this appliance, may result in property damage or personal injury.
Shown below are the pins that will hold each log in place.
LOG # 4
LOG # 3
LOG # 2
LOG # 1
Embers and Coals
f i r e - p a r t s . c o m