Archgard NorthFire-DVT36E Скачать руководство пользователя страница 3

INTRODUCTION 

Thank you for purchasing the NorthFire-DVT36E Direct Vent Built-in Gas Fireplace. 
 
The NorthFire-DV36E is one of the most advanced gas fireplaces on the market. It is designed 
using the latest technology and manufactured to the highest quality. 
 
Some of the many features are: 

 

∗ 

Small Size                      The NorthFire-DV36E is compact enough to fit into almost any size 

 room. 

∗ 

Solid Construction         The NorthFire-DV36E is constructed mainly of satin coated and 

galvanized steel for long life and durability. 

 
Please read the manual carefully prior to installation and operation of the appliance. 
Proper installation, operation and maintenance of the appliance will provide you with 
many years of enjoyment. 

 

CAUTION 

 

Due to high temperatures, the appliance should be located out of traffic and away from 
furniture and draperies. 
 
Children and adults should be alerted to the hazards of high surface temperature and 
stay away to avoid burns or clothing ignition. 
 
Young children should be carefully supervised when they are in the same room as the 
appliance. 
 
Clothing or other flammable material should not be placed on or near the appliance. 
 
Any parts removed or opened for servicing of the appliance must be properly replaced 
prior to operating the appliance. 
 
The appliance must be inspected before use and at least annually by a qualified service 
person. More frequent cleaning maybe required due to excessive lint from carpeting, 
bedding material, etc. It is imperative that the control compartments, burners and 
circulating air passageways for the appliance be kept clean. 

f i r e - p a r t s . c o m

Содержание NorthFire-DVT36E



























Отзывы: