Archgard Chalet 1800I Скачать руководство пользователя страница 29

Страница: 29 / 36

Chalet 1800 Ins

GLASS MAINTENANCE (cont’d)

WARNING: Never clean this glass with an abrasive cleaner. Use only a cleaner recommended as a
wood insert glass cleaner. Never clean the glass while it is hot; a serious burn can result.

NOTE:

A portion of the combustion air entering the firebox is deflected down over the inside of the door

glass. This air flow “washes” the glass, helping to keep smoke from adhering to its surface.

In a controlled

combustion firebox, temperatures are not always high enough to keep the glass perfectly clean.  Less air will
be flowing over the glass and the smoky, relatively cool condition of a low fire will cause the glass to become
dark.  Operating the stove with the Primary Air Control all the way open for 15-20 minutes should remove
this built up coating.  If the deposits on the glass are not very heavy, normal glass cleaners should work well.
Heavier  deposits  may  be  removed  using  wood  insert  glass  cleaner.      Remember  the  drier  the  wood,  the
cleaner the glass.

IF YOUR GLASS BREAKS

See your dealer for the exact replacement glass.

Replace with 5mm ce-

ramic glass only.

The gasket around the glass must be replaced with the

identical gasket - see your Archgard Dealer. Ensure that the fire is out and
the insert is cool to the touch.
1. Protect your work surface with padding or towels.
2. Remove the door from the insert by lifting it up and off the hinges.
3. Lay door face down on your work surface making sure the handle

hangs over the edge so the door lays flat on a soft surface.

4. Remove the 8 bolts holding the glass retainer to the door and remove

the glass.

5. Install the new glass and new gasket into the opening and replace the

glass retainer being careful not to

cross-thread

over-tighten

the

bolts.

6. Replace the door on the appliance.

PAINT

You may touch up the ARCHGARD

CHALET 1800 Wood Fireplace In-

sert

with STOVE BRIGHT high temperature paint. The correct paint is available from your dealer. When you

paint the insert, remove the gold items (i.e., door), and cover the area surrounding the fireplace with newspa-
per. Follow the directions outlined on the spray can.

DO NOT

attempt to paint while the insert is still warm.

Keep the spray can away from any source of heat or open flame. Ensure that there is adequate ventilation in
the room from the time you start painting until the paint is dry.

PLATED DOORS

If you have gold or nickel plated doors you will be happy to know that they will not tarnish, however they are
not scratch resistant. They require a totally abrasive free cleaner. Use only mild soap and warm water or
denatured alcohol to clean the gold or nickel when the surface is cool. The use of any household cleaner,
such as Windex, abrasive cleaners, or any form of acid, may permanently etch or remove some of the gold
or nickel plating. Before every fire, be absolutely sure to wipe off all fingerprints from the gold or nickel plat-
ing. Acid from debris or even your fingerprints may permanently etch the gold or nickel plating and void the
warranty.