Archgard 72-DVTE30N-2, Инструкция по установке, эксплуатации и обслуживанию, Страница: 3 / 60

72-DVTE30-2
3
INTRODUCTION
Congratulations on choosing an Archgard fireplace!
The Optima 72 - DVTE30 - 2 is one of the most advanced direct vent fireplace heaters available. It is solidly
designed using the latest technology and manufactured to the highest quality. It is our aim to provide you with
an appliance for many trouble - free years of reliable service.
The following are just some of the many features of your new gas fireplace:
Please read the manual carefully prior to installation and operation of the appliance. Proper
installation, operation and maintenance of the appliance will provide you with many years of
enjoyment.
CPI vs IPI:
Continuous Pilot on Demand Ignition (CPI) : In this mode the pilot runs continuously even when the main burner is
off. The Continuous Pilot on Demand Ignition operates on a seven day cycle. If the main burner is not turned on for
seven continuous days, the pilot will turn itself off. When the main burner is lit again the cycle repeats. The pilot will
remain lit for seven days, even after the main burner is turned off. If the main burner is lit during a seven day timing
cycle, the seven day timer will reset.
Intermittent Pilot Ignition (IPI) : A fuel saving mode in which the pilot is only used when the main burner is on. This
appliance is shipped in IPI mode. IPI mode is often the preferred method, however, there are some situations where it
may be preferable to switch the fireplace into CPI mode. For example, in colder climates the glass door or the front of
the fireplace could become very cold to the touch. Dynamic Start Advantage will solve most problems experienced by
older IPI operated fireplaces.
Please complete and submit the warranty registration card included in the back of this manual
or by visiting us at:
www.archgard.com/warranty - registration
• Heater Classification The 72 - DVTE30 - 2 is classified as a heating appliance. In con-
junction with an optional thermostat, the Optima 72 can be
operated continuously for zone heating.
• High Efficiency The 72 - DVTE30 - 2 has one of the highest efficiencies of any fire-
place, which means that it is less expensive to operate.
• Adjustable Fan Speed Heat circulation fan is fully adjustable. The fan can be adjusted
through 6 speeds to suit your comfort level.
• Adjustable Flame The flame aesthetics and heat output can be adjusted to suit
your heating needs.
• Solid Construction The 72 - DVTE30 - 2 is constructed mainly of 14 and 18 gauge
galvanized and aluminized steel for long life and durability.
• Electronic Control System This fireplace comes standard with the Dynamic Start Advantage.
This new electronic ignition system is the latest in fireplace tech-
nology. It helps to create a better draft, better flame appearance,
less condensation on the glass, and years of carefree operation.
See Page 40 for complete explanation of how the system works.
• Multiple Electronic Pilot Settings
This fireplace uses a gas control valve that is operated by a Multi-
function Remote Control. It can be set up as either an Intermittent
Pilot Ignition (IPI) system, or Continuous Pilot on Demand Ignition
(CPI) system (also known as a Pilot on Demand (POD)).