Archgard 72-DVTE30N-2 Скачать руководство пользователя страница 14

Страница: 14 / 60

72-DVTE30-2

APPROVED VENT COMPONENTS

PART #

DESCRIPTION

999

TVK3

Archgard Flex Vent Kit with

36” (914

mm) vent length (includes 999

HTC)

999

TVK5

Archgard Flex Vent Kit with

60” (1.52

M) vent length (includes 999

HTC)

999

HTC

Archgard Horizontal termination head only

999

Archgard Safety Cage for Horizontal termination head (999

HTC)

999

VSD

Archgard Vinyl siding deflector

999

SDA

Universal Adapter, Simpson Dura

Vent / Flex

Simpson Dura

Vent venting system

For best and safe venting performance, here are some general venting rules:

•

Use only Archgard or Simpson Dura

Vent direct vent systems and components.

•

Maintain a minimum of

1” (2

5mm) clearance to combustibles from the outside

surfaces of vertical vents and minimum of

1” (2

5mm) sides and bottom, and

2” (5

0mm)

from top surfaces of horizontal vents.

•

Observe local code restrictions, if any, regarding the installation of this type of gas appliance.

•

Observe the venting charts given in this manual.

•

Use vent spacers between the inside

4”

(101mm) and outside

7”

(178mm) vents at 3 ft

(915mm) intervals (Archgard Direct Vent System ONLY).

•

Never slope horizontal vents downwards towards the vent termination.

•

Maintain a minimum ¼

”

rise (6mm) for every linear foot (305mm) of horizontal vent.

•

Terminate (Horizontally) the vent only with an approved vent termination supplied by

Archgard Industries (Part # 999

HTC) or Simpson Dura

Vent Termination Cap.

•

Terminate (Vertically) the vent only with Simpson Dura

Vent Vertical Termination Cap.

•

Support horizontal vents every 3 ft (915mm) to prevent sagging

VENTING CONNECTION

The appliance will not function without being connected to a proper venting system. This

appliance may only use direct vent system supplied by Archgard Industries or Simpson Dura

Vent direct vent systems with the appropriate adaptor dependent upon the venting guidelines

within this manual.

Please strictly follow the venting instructions for optimum performance from the

appliance and to avoid sooting and/or service calls.

NOTE: Only the venting components listed below are approved for the 72

DVTE30

Содержание 72-DVTE30N-2





























































Результаты поиска

Содержание 72-DVTE30N-2

Отзывы:

Archgard 72-DVTE30N-2, Инструкция по установке, эксплуатации и обслуживанию, Страница: 14 / 60

Результаты поиска

Содержание 72-DVTE30N-2

Отзывы: