65
Maintenance
18.8 Replacing Light Bulbs
Caution:
Always handle bulbs with cotton gloves as finger prints
may reduce the life of the bulb. We recommend replacing both
bulbs at the same time.
1.
Ensure the fireplace is off and cool before servicing.
2.
Disconnect power supply to the fireplace (including back
-
up batteries).
3.
Turn off gas supply.
4.
Remove the barrier screen (see
Section 6.3
).
5.
Remove the glass door assembly (see
Section 6.4
).
6.
Remove the (2) 1/4" tek screws securing the light deflector.
7.
Remove the light deflector.
8.
Remove the old bulb from the bulb holder.
9.
Replace with a bulb of the same specifications.
10.
Ensure burner media has not been disturbed.
11.
Replace glass door assembly and barrier screen.
12.
Resupply power.
13.
Light the fireplace to verify proper operation. See
Section 17.5
for information on using the remote to control the lights.
Bulb specification:
120V / 20W
G6.35
HALOGEN
Figure 18.8.01:
Figure 18.8.03:
Figure 18.8.02: