46
Installation
16.2 Weathered Wood Log Set Installation
Step 1:
Logs use pre-drilled holes and pins in the burner to ensure
proper alignment. Beginning with Log 1, locate the holes in the
bottom of the log.
Step 2:
Lower Log 1 onto the pins in the log rest at the back of the
firebox.
Figure 16.2.01:
Figure 16.2.02:
1
1
Step 2:
Log 2 rests on top of Log 1.
Figure 16.2.03:
2
Figure 16.2.04:
2
Step 3:
Spread some embers along the back side of the burner.
DO NOT
block the gap around the burner as this supplies
secondary air to the fireplace.
Figure 16.2.05:
DO NOT BLOCK
Step 4:
Place Log 3 on the pin in the left, rear corner of the burner
in front of the embers.
Figure 16.2.06: