42
Installation
Archgard Grand Timber or Weathered
Wood log sets are designed to provide
a life-like fire bed from the day they are
installed, through the years that follow.
Care must be given when handling the
logs as they can be damaged or broken
if not handled properly. After opening
the log set package, inspect the logs to
ensure that no damage has occurred
inside the package. Please report any
damage immediately to your Authorized
Archgard Dealer.
Gas and vent connection must be made
before installing the embers and logs on
the burner.
CAUTION:
DO NOT block pilot opening
with embers.
NOTE:
Improper placement of logs and
embers may cause soot accumulation
on the internal parts and glass. This is
not covered under warranty. Do not use
broken or damaged logs.
16.0 Log Set Installation
WARNING
Failure to position the logs in accordance with the preceding diagrams or failure to use only parts
specifically approved with this appliance may result in property damage or personal injury. Never use
unapproved burner media such as rock wool or similar material. The use of unapproved burner media may
cause damage or injury and will void product warranty.
Figure 16.0.01: Grand Timber Logset overview
Log 1
Log 2
Log 3
Log 4
Log 5
Log 6
Log 7
Log 8
Log 9
IMPORTANT
When placing embers around the pilot
shield take care to not block the pilot
opening. Failure to keep the opening
clear of embers or media will cause a
delayed ignition. Embers should also
be placed so they do not completely
block burner ports. DO NOT block
secondary air gaps around burner.
Figure 16.0.02: Weathered Wood Logset overview
Log 1
Log 2
Log 3
Log 4
Log 5
Log 6
Log 7
Log 8
Log 9
Log 10
Log 11