35
Installation
13.2 Supplying Gas
Before you begin:
•
Ensure the fireplace is off and cool before servicing
•
Ensure the gas supply is turned OFF and disconnect the power supply (including backup batteries)
•
Remove the barrier screen (see
Section 6.3
)
•
Optionally, you can remove the door for more room (see
Section 6.4
)
•
Remove the wire cover (see
Section 6.5
)
•
Slide the left side sliding access door back and slide the valve out (see
Section 6.5
)
Step 1:
Run the gas line in from the left side of the fireplace.
Figure 13.2.01:
Figure 13.2.02:
Figure 13.2.03:
Step 2:
Connect the gas line to the valve and tighten.
Step 3:
Turn on the gas to the appliance and check for leaks.