29
Installation
12.0 Clearances to Combustibles
WARNING:
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this
appliance may result in property damage or personal injury or loss of life.
15.00
2.00
1:50
SIZE DWG. NO.
A
REV.
SHEET 1 OF 2
WEIGHT:
41-DVT Framing
FINISH
MATERIAL
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL 1/32"
TWO PLACE DECIMAL .015"
THREE PLACE DECIMAL .005"
ALL BENDS ARE ASSUMED
TO BE 90 UNLESS NOTED
OTHERWISE.
CHECKED
DRAWN
DATE
NAME
/23/2017
PROPRIETARY AND CONFIDENTIAL
U:\R&D\Prototype CADD\41-DVT Prototype\41-DVT Framing
Wednesday, Agst 23, 2017 7:49:17 AM
SCALE
Figure 12.1.01
12.1 Mantel Clearances
Mantel clearances are measured from
the top of the appliance opening.
WARNING:
TOP NAILING FLANGE EXTENSION MUST BE ASSEMBLED AND ATTACHED TO FIREPLACE. DO NOT REMOVE.
TOP NAILING FLANGE EXTENSION IS NOT LOAD BEARING
21" (533.4 mm)
8" (203.2 mm)
23" (584.2 mm)
10" (254 mm)
12" (304.8 mm)
25" (635 mm)
6" (152.4 mm)
4" (101.6 mm)
19" (482.6 mm)
17" (431.8 mm)
2" (50.8 mm)
15" (381 mm)
30.1
13" (764.9 mm)
IMPORTANT
If installing IHEAT, see the IHEAT manual for framing dimensions and specifications.