manualshive.com logo in svg

Archgard 36-DVIE40LN-1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 41 / 68

Поделиться
Скачать
Archgard 36-DVIE40LN-1 Скачать руководство пользователя страница 41

41

Operation

IMPORTANT

The Proflame II Remote is an integrated part of the Proflame II System, which consists of a Proflame II Remote, to be used in 

conjunction with Integrated Fireplace Control (Proflame II Control Module).

The Proflame II Remote provides for controlling the following hearth appliance functions:

1. 

Main Burner ON/OFF

2. 

Main Burner flame modulation (6 levels)

3. 

Choice of continuous or intermittent pilot (CPI/IPI)

4. 

Thermostat and SMART thermostat function

5. 

Comfort fan speed modulation (6 levels)

6. 

Variable lights (6 levels)

The Proflame Remote uses a streamline design with a simple button layout and informative LCD display. A Mode Key is provided to 

index between the features and a Thermostat Key is used for on/off or to index through the thermostat function. Additionally a Key Lock 

function is provided.

ATTENTION

• 

TURN “OFF” THE MAIN GAS SUPPLY DURING INSTALLATION OR MAINTENANCE OF THE RECEIVER DEVICE

• 

TURN “OFF” MAIN GAS SUPPLY TO THE APPLIANCE PRIOR TO REMOVING OR REINSERTING THE BATTERIES

• 

IN CASE OF REMOTE CONTROL MALFUNCTION TURN OFF THE IFC DEVICE BY REMOVING ON/OFF OVERRIDE 

JUMPER (SEE 

SECTION 20.16

)

• 

FOR INSTALLATION / MAINTENANCE, SWITCH OFF THE IFC DEVICE BY REMOVING MAIN POWER SUPPLY PLUG AND 

BATTERY BACKUP

Technical Data - Remote Control

Supply Voltage

4.5 V (three (3) 1.5V AAA batteries

Ambient temperature ratings

0 - 50°C (32 - 122°F)

Radio Frequency

315 MHz

19.4  Remote Control Operation

Figure 19.4.01

Содержание 36-DVIE40LN-1





































































Отзывы:

Нет отзывов