Archgard 36-DVIE40LN-1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 3 / 68

3
General Information
1.0 Introduction
Thank you and congratulations for choosing an Archgard Gas Fireplace insert!
The 36-DVIE40LN-1 is one of the most advanced Direct Vent Insert heaters available today. It is solidly designed using the latest
technology and manufactured to the highest quality. It is our aim to provide you with an appliance that brings many trouble-free years of
reliable service.
Some of the many features of your 36-DVIE40LN-1 are:
• Heater Classification This fireplace is classified as a heating appliance. Therefore, it uses Direct Vent safety technology
and it is suitable for continuously operated zone heating.
• High Efficiency This fireplace has one of the highest efficiencies of any Direct Vent gas insert, ensuring it is less
expensive to operate.
• Adjustable Fan Speed This fireplace comes complete with an adjustable six speed circulation fan controlled with the
remote.
• Adjustable Flame This fireplace provides the ability to adjust the flame aesthetics and heat output to suit the owner's
liking and heating needs.
• Adjustable Lighting Use the included remote to choose from six levels of accent lighting or leave the light off and allow
the flame to provide a flickering glow.
• Solid Construction This fireplace is mainly constructed of 16 and 18 gauge galvanized and aluminized coated steel for
long life and durability.
• Optional Accessories Speak with your local Authorized Archgard Dealer for a full complement of decorative accessories
to suit your home's decor and personal tastes.
• Electronic Control System This fireplace uses a gas control valve that is operated by a Multifunction Remote Control. It can be
used as either an Intermittent Pilot Ignition (IPI) system or Continuous Pilot Ignition (CPI) system
(also known as a Standing Pilot).
CPI vs IPI:
Continuous Pilot Ignition (CPI): Also known as standing pilot, in this mode the pilot runs continuously even when the main burner is off.
Intermittent Pilot Ignition (IPI): A fuel saving mode in which the pilot is only used when the main burner is on.
This appliance is shipped in IPI mode. IPI mode is often the preferred method, however, there are some situations where it may be
preferable to switch the fireplace into CPI mode. These situations include:
• Very Cold Conditions - When temperatures are colder the burner may not light as quickly. In this situation, the flames will lift off
the burner
• Excessive Condensation on Glass - Some installations could encounter excessive fogging on the glass door after startup (not
just initial startup)
• Cold Glass or Fireplace Front - In colder climates the glass door or the front of the fireplace could become very cold
CPI mode may be disabled by the installer if desired or required by local code as shown in Section 20.8 .
Fireplace Model Number: 36-DVIE40LN-1 Serial Number:_________________________
Date of Installation: ________________________________________________________________
Type of Gas Used by the Fireplace:
•
Natural Gas
•
Propane
Dealer's Name & Address: ___________________________________________________________
_________________________________________________________________________________
Dealer's Phone Number: _____________________________________________________________