12
Installation
9.0 Minimum Opening Dimensions
WARNING:
Failure to position the parts in accordance
with these diagrams or failure to use only parts specifically
approved with this appliance may result in property
damage or personal injury.
The installer must mechanically attach the marking supplied with the gas fireplace insert to the inside of the firebox of the fireplace into
which the gas fireplace insert is installed. See
Figure 9.0.02
.
Cutting of any sheet-metal parts of the fireplace, in which the gas fireplace insert is to be installed, is prohibited except as described in
Section 9.1
.
The fireplace flue damper can be fully blocked open or removed for installation of the gas fireplace insert. The fireplace and fireplace
chimney must be clean and in good working order and constructed of noncombustible materials. The chimney clean-outs must fit
properly.
WARNING:
This fireplace has been converted for use with a gas fireplace insert only and cannot be used
for burning wood or solid fuels, unless all original parts have been replaced, and the fireplace
reapproved by the authority having jurisdiction.
AVERTISSEMENT:
Ce foyer a ete converti pour utilisation avec un foyer au gaz encastrable et ne peut etre utiliser
pour bruler du bois ou autres combustibles solides a moins que toutes les pieces d'origine ete
remplacees et que le foyer ait ete approuve de nouveau par l'autorite competente.
303-0123
Figure 9.0.02:
A
B
C
D
E
F
G
Reference
"Controls in" Dimensions
Use Shallow Trim
"Controls out" Dimensions
Use Deep Trim
A
24" (609.6 mm)
24" (609.6 mm)
B
10.125" (257.18 mm)
8.625" (219.08 mm)
C
18.5" (469.9 mm)
17" (431.8 mm)
D
3.75" (95.25 mm)
0" (0.00 mm)
E
26.5" (673.1 mm) to
21.875" (555.63 mm)*
21.875" (555.63 mm)
F
37.875" (962.03 mm)
36.25" (920.75 mm)
G
111°
113°
Figure 9.0.01:
SIDE VIEW
TOP VIEW
Min. flue size required 4" (102) x 7" (178)
*Dimension E may be smaller than 26.5" (673.1 mm) if the depth
(dimension C and/or D) is larger.
Содержание 36-DVIE40LN-1
Страница 68: ...April 11 2017...