manualshive.com logo in svg

Archgard 36- D VI E40LN - 1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 6 / 76

Поделиться
Скачать
Archgard 36- D VI E40LN - 1 Скачать руководство пользователя страница 6

6

General Information

4. 0  Ra t i n g  Pl a t e

MODEL:

36-DVIE40LN-1

 (SIT 885 Proflame)

DO NOT REMOVE THIS LABEL 

LISTED VENTED GAS FIREPLACE HEATER and GAS-FIRED APPLIANCES FOR USE AT HIGH ALTITUDES. Tested to: ANSI 

Z21.88-2019 / CSA 2.33-2019 and CAN/CGA-2.17-M91 (R2014), CSA P.4.1-2015 - Testing Method for Measuring Annual Fireplace 

Efficiency,CSA C22.2 No.3 - M1998(R.2014) - Electrical Features of Fuel-Burning Equipment. This vented gas fireplace heater is 

not for use with air filters. Certified for use in both CANADA and USA. 

VENTED GAS FIREPLACE HEATER-NOT FOR USE WITH SOLID FUEL.

NG

LPG

Input rating

22,000 - 40,000 BTU/hr

(6.45 - 11.72 kW)

20,000 - 40,000 BTU/hr

(5.86 - 11.72 kW)

Manifold Pressure

1.1 - 3.8 in. W.C. (0.27 - 0.95 

kPa)

2.9 - 11.0 in. W.C. (0.72 - 2.74 

kPa)

Orifice size

3.4 mm dia.

#48 DMS (1.93 mm dia.)

Supply pressure (Min - Max)

5.0 - 14.0 in. W.C. (1.2 - 3.5 

kPa)

12.0 - 14.0 in. W.C. (2.9 - 3.5  

kPa)

Burner Primary Air Setting

1/16” (1.6mm) Open

100% Open

Altitude

0 - 4500 ft (0 - 1372 m)

0 - 4500 ft (0 - 1372 m)

Gas Control

SIT 885 Proflame II Dynamic Start with Continuous POD

Electrical rating

120 VAC, 60 Hz less than 2 A.

P.4.1 Fireplace Efficiency (FE)

76.95%

Replacement fan

RF-305-0024

Keep burner and control compartment clean. See 

Instructions accompanying the heater.  

Optional fuel conversion kit : See Manual

Minimum opening Dimensions: 

37.875”(962 mm)W x 24”(610 mm)H x 18.5”(469.9 mm)D

Minimum Chimney Flue Size:4” (100 mm) x 7” (176 mm)

Minimum clearances to Combustibles:

Sides from glass door frame: 8” (203.2 mm)

Mantle: max 12” (305 mm) at min 20” (508 mm) 

from top of appliance door

See Manual for additional dimensions and clearances

This appliance must be installed in accordance with local codes, if any; if none, follow the National Fuel Gas Code, ANSI 

Z223.1/NFPA 54, or Natural Gas and Propane Installation Codes, CSA B149.1.  Electrical connections and grounding must 

be in accordance with local codes, if any; if none, follow the current CAN/CSA C22.1 in Canada and ANSI/NFPA 70 in the 

US. This appliance is certified for installation in a bedroom or a bed sitting room. This appliance is only for use with the gas 

indicated on the rating plate and may be installed in an aftermarket, permanently located, manufactured (mobile) home where 

not prohibited by local codes. See owner’s manual for details. This appliance is not convertible with other gases, unless a 

certified kit is used. 

WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer 

to the owner’s information manual provided with this appliance. For assistance or additional information consult a 

qualified installer, service agency, or the gas supplier. This appliance must be properly connected to a Direct Vent 

venting system in accordance with the manufacturer’s installation instructions. 

WARNING: Failure to install this appliance per the manufacturer’s instructions or failure to use only parts specifically 

approved with this appliance may result in property damage or personal injury. 

WARNING: Do not operate the appliance until all sections have been assembled and installed in accordance with the 

manufacturer’s instructions. 

WARNING: Operation of this appliance when not connected to a properly installed and maintained venting system can result 

in carbon monoxide (CO) poisoning and possible death.

ONLY DOORS CERTIFIED WITH THE APPLIANCE SHALL BE USED.

For use only with barrier part # 36-BS. Follow installation instructions.

Made in Canada by:

Archgard Industries Ltd.

7116 Beatty Dr.,  Mission, B.C.

November 2021  303-6400-04

MANUFACTURE DATE:

SAMPLE

Содержание 36- D VI E40LN - 1













































































Отзывы:

Нет отзывов