manualshive.com logo in svg

Archgard 36- D VI E40LN - 1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 50 / 76

Поделиться
Скачать
Archgard 36- D VI E40LN - 1 Скачать руководство пользователя страница 50

50

Operation

Te m p e r a t u r e  In d i c a t i o n  Di s p l a y

With the system in the “OFF” position,  press the Thermostat Key and the 

Mode Key at the same time to switch between Fahrenheit (F) or Celsius (C). 

Verify on the LCD screen the correct designation is visible.

Va r i a b l e  Fl a m e  C o n t r o l

The Proflame IFC has six (6) flame levels. With the system “ON” and the flame at maximum in the appliance, pressing the Down Arrow 

Key once will reduce the flame height by one step. Repeat to lower the flame till “OFF”. With flame OFF in this configuration, fan and 

lights will still be operational.

The UP Arrow Key will increase the flame height each time it is pressed.

If the UP Arrow Key is pressed while the system is on but the flame is off, the flame will activate in the high setting.

A single “beep” will confirm reception of the command.

Fa n  Sp e e d  C o n t r o l

If the appliance is equipped with a hot air circulating fan, the speed of the fan 

can be controlled by the Proflame system. The fan speed can be adjusted 

through six (6) speeds. To activate this function use the Mode Key to index to 

the fan control icon. Use the Up/Down Arrow Keys to turn on, off or adjust the 

fan speed. A single “beep” will confirm reception of the command.

In manual mode the fan will activate immediately upon burner ignition. 

Adjust the fan speed to personal preference. Blower will shut off when the 

burner is extinguished.

Fi g u r e  19 . 5. 06:

Fi g u r e  19 . 5. 07 :

Fi g u r e  19 . 5. 08 :

Dimmer Control (Light)

This function is used to control the variable lights. To activate this function use 

the Mode Key to index to the variable light icon.

The intensity of the output can be adjusted through six (6) levels. Use the 

Up/Down Arrow Keys to adjust the output level. A single "beep" will confirm 

reception of the command.

Fi g u r e  19 . 5. 09 :

This function is disabled when in SMART Thermostat Mode and does not operate in the first two minutes of 

operation during the Dynamic Start Advantage.

Содержание 36- D VI E40LN - 1













































































Отзывы:

Нет отзывов