35
Installation
17 . 1 Br i c k Pa n e l In s t a l l a t i o n
17 . 0 Fi r e b o x Li n e r In s t a l l a t i o n
The following steps highlight the procedure for installing Quebec City Red or Quebec City Grey brick panel firebox liners. Handle the
panels with care as they are delicate. Inspect the panels to ensure that no damage has occurred inside the package. Please report any
damage immediately to your Authorized Archgard Dealer.
Before you begin:
•
Make sure the fireplace is o and cool prior to installation
•
En s u r e t h e g a s s u p p l y i s t u r n e d OFF, d i s c o n n e c t t h e p o w e r s u p p l y
•
Remove barrier screen (see
Se c t i o n 14. 0
)
•
Remove Glass Door (see
Se c t i o n 15. 0
)
St e p 1:
Remove and retain the (2) Tek screws from the upper
front corners.
St e p 2:
Place the rear brick panel in the back of the firebox.
Fi g u r e 17 . 1. 01:
Fi g u r e 17 . 1. 02:
St e p 3:
Place the left or right side panel.
Fi g u r e 17 . 1. 03:
Removal is the reverse of Installation.
St e p 4:
Make sure both brick clips are accessible before
continuing.
Fi g u r e 17 . 1. 04: