13
Installation
6.4 Glass Door Installation
WARNING:
Do not operate appliance with the glass front removed, cracked, or broken. Replacement of the glass should be done by
a licensed or qualified service person. Do not attempt to remove the glass door when the appliance is hot. Be sure there
are no fingerprints left on the glass panels during install or when cleaning as high temperatures can bake these prints on
permanently. Inspect the door gasket to ensure no damage has occurred when installing the glass door.
Figure 6.4.01:
Figure 6.4.02:
Step 1:
Slide the door onto the firebox. The door brackets will
hold it in place while the hooks are engaged.
Step 2:
Lift the upper door handles up to push the top of the door
all the way back.
Step 3:
With the door in place, the upper handles will rest on the
upper brackets.
Step 4:
Pull the door handle and drop it down so that the door
latch will pass through the cut-out on the door handle.
Figure 6.4.03:
Figure 6.4.04:
Pass door latch
through cut-outs on
door handles.
Back side view
Upper Hooks:
Note:
to access the lower door hooks, the upper valve access panel must be removed. See
Section 6.5
.