Archgard 31-DVIM33C-2, Инструкция по установке, эксплуатации и обслуживанию, Страница: 15 / 40

15
Installation
Appliance Description
Leveling the 31-DVIM33C-2
Front Level
Located slightly in from the front
edge of the fireplace is the new
leveling feature. Leveling bolts can
be installed to enable you to raise
the front of the firebox if necessary. If
you need higher adjustment you only
need to change to a longer bolt. If no
rise is required simply leave empty.
Rear Level
Before placing the appliance into the fireplace, check the hearth of the fireplace to see if it is level with the front of the fireplace. If it is
not, measure the depth of the hearth. Loosen the three screws of the leveling “L” bracket at the back of the appliance. Lower it to the
measurement obtained and tighten the screws.
Electrical Connections
The 31-DVIM33 comes complete with an variable speed fan.
Do not cut or remove the grounding prong from this plug.
NOTE: This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes,
with the National Electrical Code, ANSI / NFPA 70 , or the Canadian Electrical code, CSA C22.1 .