manualshive.com logo in svg

Archgard 22-DVIE22LN-1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 8 / 64

Поделиться
Скачать
Archgard 22-DVIE22LN-1 Скачать руководство пользователя страница 8

8

Installation

6.0  Appliance Overview

6.1  Rating Plate Location

Figure 6.1.01:

6.2  Appliance Overview

The valve and control module are located 

underneath the fireplace. They can be accessed 

by flipping down the control access cover on the 

fireplace surround. 

The optional fan is located on the inside of the rear 

fireplace shell and can only be accessed from the 

rear of the fireplace.

Note:

 This manual may use images of an unpainted 

fireplace for the purposes of illustration.

*Left and right side references in this manual 

correspond with the sides identified in 

Figure 

6.2.01

.

6.3  Leveling the Appliance

The 22-DVIM22LN-1 is equipped with front and rear leveling bolts. 

The fireplace has the ability to independently level left/right and 

front/back.

Leveling is done from the bottom of the unit

Figure 6.2.01:

Figure 6.3.01:

The rating plate is located under the firebox, behind the control access cover. See 

Section 6.4

 for information on accessing the 

controls.

Front Bolts

Rear Bolts

Surround

Left Side

Right Side

Control Access Cover

Rating Plate Location

Содержание 22-DVIE22LN-1

































































Отзывы:

Нет отзывов