manualshive.com logo in svg

Archgard 22-DVIE22LN-1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 55 / 64

Поделиться
Скачать
Archgard 22-DVIE22LN-1 Скачать руководство пользователя страница 55

55

Maintenance

20.11  Replacing the Optional Fan Speed Control

Before you begin:

• 

Ensure the fireplace is off and cool before servicing

•  Ensure the gas supply is turned OFF and disconnect the power supply

• 

Flip down the control access cover (see 

Section 6.4

)

Figure 20.11.01:

Step 1:

 Remove the fan power cord mounting bracket. Remove 

the fan speed control / piezo igniter bracket.

Figure 20.11.02:

Step 2:

 Remove the knob.

Figure 20.11.03:

Step 4:

 Unplug the fan speed control.

Installation is the reverse of removal.

Note:

 Fan wires should point down upon install.

CAUTION:

 Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous 

operation. Verify proper operation after servicing. This appliance, when installed, must be electrically grounded in accordance with 

local codes or, in the absence of local codes, with the 

National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical code, 

CSA C22.1

.

WARNING: 

Servicing of this appliance 

must be conducted by a qualified service technician

. Improper servicing, adjustment or 

alteration of this appliance may cause property damage, personal injury or loss of life. All servicing should be conducted 

with the appliance cold. All replacement parts must be authorized by Ambiance for suitability.

Step 3:

 Remove the nut securing the fan speed control to the 

bracket.

Figure 20.11.04:

Содержание 22-DVIE22LN-1

































































Отзывы:

Нет отзывов