manualshive.com logo in svg

Archgard 22-DVIE22LN-1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 44 / 64

Поделиться
Скачать
Archgard 22-DVIE22LN-1 Скачать руководство пользователя страница 44

44

Operation

Step 7:

 Turn the hi - lo button to adjust the height of the burner 

flame.

Figure 19.2.07:

 

Operating the Optional Fan

Step 1:

 With the mark all the way to left (counter-clockwise), turn 

the dial clockwise until you hear a "click". The fan is now engaged.

Figure 19.2.08:

 

If you have the optional fan kit installed, the thermal switch will engage the fan within up to 15 minutes of lighting the fireplace. The fan 

speed is controlled using a dial located behind the control access cover (see 

Section 6.4

). The following instructions describe how to 

adjust the fan speed.

WARNING:

NEVER operate this appliance with the barrier screen 

removed.

"CLICK"

Off

On

Step 2:

 Turn the dial clockwise to reduce the speed of the fan. 

Turn counter-clockwise to increase the speed of the fan.

High

Low

Figure 19.2.09:

 

Before you begin:

•  Read the instructions fully before starting

• 

Ensure the fireplace is off and cool before starting

• 

Flip down the control access cover (see 

Section 6.4

)

WARNING: 

NEVER operate this appliance with the barrier screen removed.

Note:

 Once the pilot is lit, the main burner is controlled using the 

on/off wall switch or thermostat.

ATTENTION:

The SIT 821 valve is equipped with a 7 day 

Pilot on Demand (POD) timer. If you have 

this version of the fireplace, the pilot will 

automatically shut itself off after 7 days of no 

main burner activity.

See the rating label on your appliance for 

further information.

Содержание 22-DVIE22LN-1

































































Отзывы:

Нет отзывов