manualshive.com logo in svg

Archgard 22-DVIE22LN-1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 35 / 64

Поделиться
Скачать
Archgard 22-DVIE22LN-1 Скачать руководство пользователя страница 35

35

Installation

17.0  Firebox Liner Installation

17.1  Brick Panel Installation

The following steps highlight the procedure for installing brick panel firebox liners. Handle the panels with care as they are delicate. 

Inspect the panels to ensure that no damage has occurred inside the package. Please report any damage immediately to your 

Authorized Archgard Dealer.

Before you begin:

•  Ensure the gas supply is turned OFF and disconnect the power supply

• 

Remove barrier screen (see 

Section 14.0

)

• 

Remove Glass Door (see 

Section 15.0

)

Step 3:

 Hold the Rear panel in place. The short brick ends should 

be at the top of the panel.

Step 4:

 Place one side panel (left or right) in place. 

Step 5:

 Use one of the brick clips to secure the panel in place.

Step 4:

 Place the remaining panel in place and secure with the 

remaining brick clip.

Figure 17.1.03:

Figure 17.1.04:

Figure 17.1.05:

Figure 17.2.04:

Figure 17.1.01:

Step 1:

 Locate the brick clips included in the fireplace manual 

bag.

Figure 17.1.02:

Step 2:

 Remove the two screws located in the top of the firebox. 

These will be used to install the brick clips.

Содержание 22-DVIE22LN-1

































































Отзывы:

Нет отзывов