Archgard 22-DVIE22LN-1 Скачать руководство пользователя страница 3

Страница: 3 / 64

General Information

1.0 Introduction

Thank You and Congratulations for choosing an Archgard Gas Fireplace insert!

Harmonia (Har-MO-nee-ah) - The immortal goddess of harmony and concord. Harmonia presided over both marital harmony and the

harmonious action of soldiers in war. Harmonia is described as having a heart that is completely pure, without bad thoughts whatsoever.

The Harmonia 22 is among the most advanced Direct Vent Insert heaters available today. It is solidly designed using the latest

technology and manufactured to the highest quality. It is our aim to provide you with an appliance that brings many trouble-free years of

reliable service. This manual provides information regarding model number 22-DVIM22LN-1.

Some of the many features of your 22-DVIM22LN-1 are:

•

Heater Classification

This fireplace is classified as a heating appliance. Therefore, it uses Direct Vent safety technology

and it is suitable for continuously operated zone heating.

•

High Efficiency

This fireplace has one of the highest efficiencies of any Direct Vent gas insert, ensuring it is less

expensive to operate.

•

Adjustable Fan Speed

(optional)

An adjustable six speed circulation fan is available for this fireplace insert.

•

Adjustable Flame

This fireplace provides the ability to adjust the flame aesthetics and heat output to suit the owner's

liking and heating needs.

•

Solid Construction

This fireplace is mainly constructed of 16 and 18 gauge galvanized and aluminized coated steel for

long life and durability.

•

Optional Accessories

Speak with your local Authorized Archgard Dealer for a full complement of decorative accessories

to suit your home's decor and personal tastes.

•

Remote Control

Compatible

You may install a third party remote control providing convenient operation from the comfort of your

chair.

Please complete and submit the warranty registration card included in the back of this manual or by visiting us at:

www.archgard.com/warranty-registration

Model Number Definition (22-DVIM22LN-1)

Number assigned to identify this model.

DVI

Direct Vent Insert

Millivolt Ignition

Natural Gas Input Rating in BTU

Traditional Log Burner

Natural Gas

-1

Revision Number

Содержание 22-DVIE22LN-1

































































Результаты поиска

Содержание 22-DVIE22LN-1

Отзывы:

Archgard 22-DVIE22LN-1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 3 / 64

Результаты поиска

Содержание 22-DVIE22LN-1

Отзывы: