Archgard 22-DVIE22LN-1, Инструкция по установке, эксплуатации и обслуживанию, Страница: 14 / 64

14
Installation
Position 1 Position 2 Position 3
Upper Surround Bracket
Lower Surround Bracket
Minimum Depth:
The screen and door both extend
outside of the surround.
Door Flush:
The screen extends outside of the
surround but the door does not.
Screen Flush:
The face of screen is flush with the
surround.
Remove the two 1/4" tek screws holding
the brackets in place.
Move the bracket toward the rear of the
fireplace by two holes and reinsert the
tek screws.
Remove the two 1/4" tek screws holding
the brackets in place.
Move the bracket toward the rear of the
fireplace by one hole and reinsert the tek
screws.
Default position. The fireplace is shipped
in this configuration.
Two holes can be seen beyond the end
of each bracket.
Adjusting the Surround
To change the position of the surround brackets, remove the Tek screws securing each bracket, move the bracket to the desired
location and reinsert the screws.
Figure 9.1.02:
Control Access Cover Adjustment
If the surround is installed in Position 1 or Position 2 as shown above, the blind on the control access cover must be bent.
To bend, apply force evenly across the blind.
Figure 9.1.03: